MYLIGHT 4KW MAX ENPHASE BOX

The MyLight Max 4kW Enphase box is a central energy management unit, designed to optimize solar self-consumption in photovoltaic installations. It is specially adapted to Enphase microinverters and offers a complete monitoring and management solution to improve energy efficiency.

DESCRIPTION OF THE MYLIGHT 4KW MAX UNIVERSAL BOX

The MyLight Max 4kW Enphase box is a central energy management unit designed to optimize self-consumption with storage. Adapted to Enphase microinverters, this connection box offers a complete solution for monitoring and managing solar energy consumption by integrating advanced functionalities for monitoring and managing electrical equipment.

Thanks to detailed monitoring of solar energy production, electricity consumption and self-consumption, the MyLight Max 4kW Enphase box can effectively optimize self-consumption. It also offers the ability to manage large appliances such as water heaters and connects to MyLight Systems' GreenPlay algorithm for intelligent energy management.

As a connected electrical box, the MyLight Max 4kW Enphase box guarantees reliability and remote management thanks to secure communication with the MyLight Systems software. In addition, it has an independent GSM connection, guaranteeing a reliable connection even in the event of a main network outage.

The box stands out for its “all-in-one” approach: it includes the Smart Master G3 for monitoring and control, integrated protection of the photovoltaic system and the integrated Q RELAY. It's also designed to accommodate an Envoy Gateway (not included), making it easy to seamlessly integrate these additional devices.

WHERE AND HOW TO INSTALL THIS 4KW BOX

To install the MyLight Max 4kW Enphase box, first select a dry, well-ventilated place with an ambient temperature between +5°C and +40°C. Use the appropriate fasteners to securely mount the enclosure to the wall or panel.

Connect the network power cord according to the selected model (single-phase or three-phase). Connect the cable from the photovoltaic panel to the terminals provided for the photovoltaic power supply. If your installation includes a water heater, connect it to the dedicated terminals.

To connect to the network and the Internet, use the available communication options: Power Line (PLC), Ethernet or RS485. Install the SIM card or GSM module to ensure independent connection. The cabinet is also designed to accommodate an Envoy Gateway (not included), making energy management easier.

Configure the enclosure as described in the user manual to adjust communication and power management settings. After installation, check all electrical and communications connections and perform tests to ensure proper system operation.

For more information, see the user manual or visit the MyLight Systems website.

WHAT CONTAINS THE 4KW VIRTUAL BATTERY BOX

MyLight Max 4kW Enphase box cost:

• 1 smart Master G3 for energy monitoring and control.
• 1 circuit breaker for protection of solar circuits
• 1 differential switch with increased capacity, typically 40 A - 30 mA for single-phase models.
• 1 type 2 surge protector - 5 kA to protect against overvoltages.
• 1 Qrelay enphase
• 1 communication terminal block
• 1 GSM module

TECHNICAL DATA