![200L photovoltaic solar water heater](https://www.ase-energy.com/9257-large_default/chauffe-eau-solaire-photovoltaique-200l.webp)
![200L photovoltaic solar water heater](https://www.ase-energy.com/9257-large_default/chauffe-eau-solaire-photovoltaique-200l.webp)
Heats up to 65°C
3 year warranty
Direct Plug&Play connection thanks to MC4
Connection to photovoltaic solar panel and/or AC network
The 200L photovoltaic solar water heater provides hot water economically and without CO2 emissions. The photovoltaic modules are directly connected to the water heater, allowing water to be heated using solar energy. 1800W photovoltaic heating power and can heat up to 65°C, enough to provide hot water to a family of several people. An additional heat exchanger allows the water heater to be connected to an existing heating system (gas, oil or pellets) to heat the water on days with little sunlight. Equipped with multiple MPP (Maximum Power Point) trackers for different photovoltaic strings, providing maximum flexibility and yield.
The 200 liter photovoltaic water heater offers an economical, ecological and reliable solution and here are these advantages:
The installation of a 200 liter photovoltaic water heater can be carried out by following a few simple steps to ensure its proper functioning.
First, choose a location with good sunlight to install the solar panels. Make sure this location is close to hot water usage points. Next, mount the solar panels according to the manufacturer's instructions and make sure they are properly secured to prevent movement. Connect the solar panels to the charge controller to manage the solar energy input. Be sure to follow polarities and electrical safety recommendations.
Install the water heater in the intended location and connect the cold water inlet and hot water outlet to the domestic pipes. Connect the charge controller to the photovoltaic water heater and ensure all connections are secure.
Turn on the system and perform tests to verify proper operation.
Data | Value |
Storage volume | 200L |
Nominal pressure | 0.8MPa |
Max. open circuit voltage | 47.5Voc |
Recommended photovoltaic power | 2000-6000Wc |
Max. connected photovoltaic energy | 6000Wc |
Max. photovoltaic heating power | 1800W |
Max. photovoltaic current consumption | 16A |
Max. water temperature setting range | 10 to 65°C |
Water connection | L ½ (M) |
Solar connection | Cable |
IP protection rating | 24 |
Weight | 74kg |
Dimensions (Lxwxh) | 690 x 690 x 1430 mm |
Guarantee | 3 years |
This solar water heater is versatile and can be used in different installations to provide hot water efficiently and environmentally friendly. Here are some examples of applications: